| Category | Item | Unit | 1L | 2L | 3L | 5L | 12L | 20L | 30L |
| Basic Specification | Raw Material | — | PE/PP/PA/PVC/PETG/ABS/PS/EVA/TPU etc | PE/PP/PA/PVC/PETG/ABS/PS/EVA/TPU etc | |||||
| Dimension | m | 2.6x1.6x1.8 | 2.9x1.9x1.9 | 3.2x2.0x2.0 | 3.5x2.1x2.1/3.7x3.0x2.1 | 4.3x3.5x2.2/4.6x4.4x2.2 | 5x5.9x2.35/5x6.5x2.4 | 5.3x6.4x2.4 | |
| Total Weight | T | 2.3Z4.2 | 3.2Z6.5 | 3.4Z6.8 | 4.878.5 | 12/13 | 17/18.5 | 20 | |
| Extrusion System | Screw motor | KW | 7.575.5 | 15/7.5 | 18.5/15 | 22/18.5 | 30(37)/22 | 55/37 | 75/55 |
| Diameter of screw | mm | 55/45 | 65/55 | 70/65 | 80/70 | 90/80 | 100/90 | 110/100 | |
| Screw L / D ratio | L/D | 23:1/23:1 | 25:1/23:1 | 23:1/25:1 | 23:1/23:1 | 25:1(28:1)/23:1 | 28:1/28:1 | 28:1/28:1 | |
| Extruder heating power | KW | 7 | 15 | 18 | 20 | 23 | 28 | 30 | |
| Number of heating zones | pcs | 3 | 3 | 3 | 4 | 5 | 7 | 8 | |
| Plasticizing capacity | kg/h | 55 | 70 | 75 | 95 | 120/130 | 160 | 180 | |
| Die Head | Heating zones | pcs | 3-5 | 3-7 | 3-7 | 3-9 | 3-12 | 3-11 | 3-5 |
| Heating power | KW | 1.5-3 | 2-4.5 | 2.5-5 | 3-6 | 5-9.5 | 8-14 | 10-12 | |
| Number of cavities | — | 1-4 | 1-6 | 1-6 | 1-7 | 1-10 | 1-5 | 1-2 | |
| Clamping System | Sliding distance | mm | 300 | 360/400 | 360/400/450 | 450/550 | 600/650/700/800/850 | 700/800/850 | 800/900 |
| Clamping distance | mm | 150 | 200 | 200 | 250/200 | 350/250/200 | 350/250 | 400/350 | |
| Open stroke | mm | 160-310 | 160-360 | 180-380/160-360 | 230-480/180-380/160-360 | 330-680/250-500/240-440 | 380-730/330-680/300-550 | 420-820/380-730 | |
| Clamping force | kn | 50 | 80 | 90 | 100 | 125/180 | 180 | 200 | |
| Power consumption | Total power | KW | 14-16/23-25 | 24-26/42-45 | 37-41/48-52 | 44^16/59-63 | 72-78 | 80-110 | 136-140 |
| Air pressure | MPa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |
| Air consumption | m3/ min | 0.6/0.4 | 0.8/0.4 | 0.8/0.6 | 1 /0.8 | 0.8 | 1 | 1.1 | |
| Water consumption | m3/ h | 0.6/1 | 1/1.2 | 1/1.2 | 1.2/1.5 | 1.5 | 2 | 2.2 | |
1.The number of die head and the clamping stroke listed in the above are set for standard models. Capacity of products in different sizes made on one machine must be no more than the plus or minus 20% of the recommended one. 2.One machine, used for producing products with sizes in variety and capacity in big difference, can be designed with die heads in odd number. This design makes it possible to serve one machine in a multi-way by shutting down one or more die head. Take machine "TVHD-1L-3" as an example, three die heads for 180ml bottle and two die heads for 500ml bottle. 3.The above models can all be upgraded into aHybrid Type" , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould. 4.Above data is for reference only. Tonva retain the right to modify mechanical structure. Equipment purchase is subject to contact.
Our machine has been serving customers all over the world. 
Reply the request and take action in24 hours.
Blowing mould and injection mould made at TONVA original company.
100% Quality inspection before the shipment.
Provide training service in TONVA company or clinet’s factory.
Engineer for overseas installation is available
Auxiliary machine for complete line.
Provide consultation service in request.
Customized design is available as requirements.