| Category | Item | Unit | 1L-4 | 2L-3 | 5L-2 | 12L-2 |
| Basic Specification | Raw Material | — | PE/PP | |||
| Dimension | m | 5.3x3.5x2.4 | 5.3x3.5x2.4 | 5.3x4.5x2.4 | 6.0x3.8x2.4 | |
| Total Weight | T | 8 | 12 | 12 | 12 | |
| Product Capacity | ml | 1000 | 2000 | 5000 | 12000 | |
| Extrusion System | Diameter of screw | mm | 90/80 | 90/80 | 90/80 | 100/90 |
| Screw L / D ratio | L/D | 25:1/23:1 | 25:1/23:1 | 25:1/23:1 | 28:1/25:1 | |
| Number of heating zones | pcs | 5 | 5 | 5 | 7 | |
| Extruder drive power | KW | 30/22 | 30/22 | 30/22 | 45/30 | |
| Plasticizing capacity | kg/h | 120 | 120 | 120 | 160 | |
| Die Head | Heating zones | pcs | 5 | 7 | 5 | 5 |
| Number of cavities | 一 | 4 | 3 | 2 | 2 | |
| Center distance | mm | 150 | 190 | 240 | 280 | |
| Clamping System | Clamping distance | mm | 200 | 200 | 250 | 350 |
| Sliding distance | mm | 700 | 700 | 650 | 800 | |
| Open stroke | mm | 240-440 | 240-440 | 230-480 | 330-680 | |
| Clamping force | kn | 125 | 125 | 125 | 180 | |
| Air pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Power consumption | Air consumption | m3/ min | 0.9 | 0.9 | 0.9 | 1 |
| Cooling water consumption | m3 / h | 1.5 | 1.5 | 1.5 | 1.8 | |
| Oil Pump power | KW | 11 | 15 | 15 | 18.5 | |
| Total power | KW | 72-78 | 72-78 | 72-78 | 88-113 | |
1.lt is suitable for producing 1L-12L fuel bottle, lubricating oil bottle, etc. 2.Smooth treatment inside the die head with no dead angle in the curve flow runner gives good effect to smoothness and no lines outside and inside the finished products. 3. The effect of multi-layer co-extrusion, with the option of visible line design in the finished product, ensures uniform thickness in layers and the 入-shaped flow runner design inside die head, with less than two hours of color change, create translucent and straight visible line with even width top and bottom. 4. Machine can be equipped with auto deflashing, take-out units for finished product, conveyors for waste material and finished product, in-mould label and leak tester. 5. This model can be upgraded into Hybrid Type" , the carriage moving part of which is designed with servo motor to achieve no noise, easy operation, precise position and swift center-focus on mould.
Our machine has been serving customers all over the world. 
Reply the request and take action in24 hours.
Blowing mould and injection mould made at TONVA original company.
100% Quality inspection before the shipment.
Provide training service in TONVA company or clinet’s factory.
Engineer for overseas installation is available
Auxiliary machine for complete line.
Provide consultation service in request.
Customized design is available as requirements.